4x512 channels synchronous DMX Artnet controller FCC CE RoHS dmx over ethernet artnet box led controller factory

Products Description:

This DMX decoder adopts advanced computer control chip,can receive the international DMX - 512 standard digital control signals and converted into PWM controller signal to drive the LED.It can be controlled by the DMX Console,and can connected with numbers of DMX Decoder to increase the output power to realize all kinds of changing mode.Besides, this DMX decoder can be used as the synchronous controller to controlled the LED alone,it can realize the synchronous effects.This decoder adopt the digital tube to show the address code,and with 3 buttons to setting,make it more easy to used.

Technical Specification:

Working temperature: -20-60

Supply voltage: 5V-24VDC

Output: 4 channels

External dimension: L165W68H40mm

Packing size: L180W95H60mm

Net weight: 320g

Gross weight: 355g

Static power consumption: <1W

Output current: each channel 4A

Output power: 5V:<80W,  12V:<192W,  24V:<384W

Connecting Description:

 DMX Input/output interface:

Address code and function Setting Button:

Power input and Load output interface:

DMX address code settings:

Each DMX common controller occupied 3 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest,511 address codes could be setted in all.DMX original address code equal aggregate value of the coding switch value from 1 to 9,dial the coding switch upwards(ON is setted 1),the value of bit can be gotten, on the contrary, the value of bit is 0.

DMX signal can be received when coding switch FUN(10)=OFF(ON is setted 0).

Typical Drawing: